FreeBSD 8.0-RELEASE
This release added support for the SiI 3132 eSATA on board controller chip.
The below is from the release notes. SEE http://www.freebsd.org/releases/8.0R/relnotes-detailed.html
The FreeBSD CAM SCSI subsystem ( cam(4)) now includes experimental support for ATA/SATA/AHCI-compliant devices. This is disabled by default. To enable this, adding the following kernel options to your kernel configuration file and rebuild the kernel:
device ahci
device siis
Or add the following to /boot/loader.conf :
ahci_load="YES"
siis_load="YES"
The current implementation supports AHCI-compliant controllers and SiliconImage SiI3124/SiI3132/SiI3531 controllers. The device node of an ATA drive is ada and an ATAPI drive is cd.
External eSATA Disk Enclosure
Rosewill RSV-S4-X 4 Bay SATA to eSATA (Port Multiplier)
SEE http://www.rosewill.com/products/s_1503/productDetail.htm
SEE http://www.newegg.com/Product/Product.aspx?Item=N82E16816132029&cm_re=rosewill_sata_enclosure-_-16-132-029-_-Product (Cost $100 dollars plus shipping when on sale.)
OS Drive
The OS drive is a 2.5 40Gig laptop drive with a 2.5 to 3.5 EIDE adaptor. (The DOM card was removed). The drive was mounted with Velcro tape on the left side bottom of the case. See ad0 in dmesg below.
Serial Console Setup
RS232 port information on the SS4200. SEE http://ss4200.pbworks.com/Console-Access-via-RS232
Configuring FreeBSD. SEE http://www.freebsd.org/doc/handbook/serialconsole-setup.html
Run below command
echo 'console="comconsole"' >> /boot/loader.conf
Edit File /etc/ttys
# Serial terminals
ttyu0 "/usr/libexec/getty std.9600" vt100 on secure
Reboot
Dmesg Output
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE-p2 #0: Sun Jan 17 03:32:44 UTC 2010
root@srvr1:/usr/src/sys/i386/compile/SRVR1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 420 @ 1.60GHz (1600.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10661 Stepping = 1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 536870912 (512 MB)
avail memory = 502325248 (479 MB)
ACPI APIC Table: <121907 APIC1340>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <121907 XSDT1340> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xffa80000-0xffafffff,0xe0000000-0xefffffff,0xffa40000-0xffa7ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xbc00-0xbc1f mem 0xff6e0000-0xff6fffff irq 16 at device 0.0 on pci1
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:32:08:d8
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
siis0: <SiI3132 SATA2 controller> port 0xcc00-0xcc7f mem 0xff8ffc00-0xff8ffc7f,0xff8f8000-0xff8fbfff irq 18 at device 0.0 on pci2
siis0: [ITHREAD]
siisch0: <SIIS channel> at channel 0 on siis0
siisch0: [ITHREAD]
siisch1: <SIIS channel> at channel 1 on siis0
siisch1: [ITHREAD]
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xe000-0xe01f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f30
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xdc00-0xdc1f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f30
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd880-0xd89f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f30
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f30
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa3f800-0xffa3fbff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI controller> port 0xe880-0xe887,0xe800-0xe803,0xe480-0xe487,0xe400-0xe403,0xe080-0xe08f mem 0xffa3fc00-0xffa3ffff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
Timecounter "TSC" frequency 1600005480 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 38154MB <HITACHI DK23EB-40B 00K0A0B4> at ata0-master PIO4
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
(aprobe1:siisch1:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
PM ports: 5
PM RESET 0 0000 1
PM RESET 1 0000 1
PM RESET 2 0000 1
PM RESET 3 0000 1
PM RESET 4 0000 1
PM reset done
PM connect done
PM status: 0 - 00000123
PM status: 1 - 00000123
PM status: 2 - 00000113
PM status: 3 - 00000113
(aprobe2:ahcich0:0:0:0): SIGNATURE: 0000
(aprobe3:ahcich1:0:0:0): SIGNATURE: 0000
(aprobe4:ahcich2:0:0:0): SIGNATURE: 0000
(aprobe5:ahcich3:0:0:0): SIGNATURE: 0000
PM status: 4 - 00000000
(aprobe0:siisch1:0:0:0): SIGNATURE: 0000
(aprobe0:siisch1:0:1:0): SIGNATURE: 0000
(aprobe0:siisch1:0:2:0): SIGNATURE: 0000
(aprobe0:siisch1:0:3:0): SIGNATURE: 0000
ada0 at siisch1 bus 0 target 0 lun 0
ada0: <ST3500630AS 3.AAK> ATA/ATAPI-7 SATA 2.x device
ada0: 300.000MB/s transfers
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
ada1 at siisch1 bus 0 target 1 lun 0
ada1: <ST3500641AS 3.AAJ> ATA/ATAPI-7 SATA 2.x device
ada1: 300.000MB/s transfers
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
ada2 at siisch1 bus 0 target 2 lun 0
ada2: <HDS724040KLSA80 KFAOA46A> ATA/ATAPI-7 SATA 1.x device
ada2: 300.000MB/s transfers
ada2: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada3 at siisch1 bus 0 target 3 lun 0
ada3: <HDS724040KLSA80 KFAOAC6A> ATA/ATAPI-7 SATA 1.x device
ada3: 300.000MB/s transfers
ada3: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada4 at ahcich0 bus 0 target 0 lun 0
ada4: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada4: 300.000MB/s transfers
ada4: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada4: Native Command Queueing enabled
ada5 at ahcich1 bus 0 target 0 lun 0
ada5: <ST31500341AS SD1B> ATA/ATAPI-8 SATA 2.x device
ada5: 300.000MB/s transfers
ada5: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada5: Native Command Queueing enabled
ada6 at ahcich2 bus 0 target 0 lun 0
ada6: <ST31000340AS SD04> ATA/ATAPI-7 SATA 2.x device
ada6: 300.000MB/s transfers
ada6: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada6: Native Command Queueing enabled
ada7 at ahcich3 bus 0 target 0 lun 0
ada7: <ST31000340AS SD1A> ATA/ATAPI-8 SATA 1.x device
ada7: 150.000MB/s transfers
ada7: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada7: Native Command Queueing enabled
Comments (0)
You don't have permission to comment on this page.