| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

SIL3132 Windows Server 2008 x64 Driver

Page history last edited by gallymimus 13 years, 6 months ago

Windows Server 2008 x64 R2 installs and seems to work fine on the SS4200.

 

One of the major issues is that a driver for the SIL3132 is not available for 2008 x64 R2.

 

I was able to get it running with the following procedure:

 

 

 

I downloaded driver version 1.0.15.6 from siliconimage.com under the drivers listed for the SIL3132.  It is listed as the base driver for windows 7 x64

 

unpack the driver zip file and under AMD64 SI3132.inf was modified in the following way:

 

%PCI\VEN_1095&DEV_3132.DeviceDesc%=SI_3132_XP, PCI\VEN_1095&DEV_3132&SUBSYS_31328086

was added to the bottom of section: [SI_HDC.NTamd64]

 

HKR,SupportedSubsystemIDs, %SI3132_SUB_ID_DESC_INTEL%, 0x00010001, 0x31328086

was added to the bottom of section: [SupportedSubSystemIds_AddReg]

 

SI3132_SUB_ID_DESC_INTEL="Silicon Image SiI 3132 SATALink Controller (Intel)"

was added to section [Strings] right underneath the line: SI3132_SUB_ID_DESC_DELL_3="Silicon Image SiI 3132 SATALink Controller (Dell_3)"

 

Finally, go to the mass storage controller with the yellow warning mark, select update driver and navigate to the AMD64 directory.

 

The driver should be auto detected.  You will get a warning that the driver is unsigned.

 

 

Comments (0)

You don't have permission to comment on this page.